simmikie
Newbie

Posts: 7
|
 |
« on: April 30, 2006, 10:22:49 PM » |
|
Well I am back and apparently no smarter than the last time I posted a question. Sorry! Okay I downloaded Charon, C-Force, Raptor a 10k line word (combo) list and 1900+ proxies. I read and re-read the C-Force tutorial on this forum, I educated myself on proxies (I thought) as well as word list. I'm set, target list in hand I fire up C-Force, import my list that evaporated to 246 good anons, and plugged in my word list. I am cocked and ready. I just know that in a few minutes I will be knocking on some doors and gaining access. I was sooo wrong!!
The problems I experienced primarily it seemed were proxy-judges. The ones that came with C-Force did not work (according to C-Force). But the thing that stymies me is that I do not need to re-check the proxies, that was done in Charon. I loaded Charon into C-Force and rechecked the proxies using it's judges, but C-force seemed not to acknowledge that the proxies were already verified and kept insisting I load judges! From where??? I am utterly perplexed, when I just ran the C-Force against the site I was targeting, I would get a message stating that the proxies were no good or I would receive an error of some sort, and it would abort. I whipped out the tutorial and tried to follow along step by step, but the simplicity of operation inferred by the tutorial was not the reality I was experiencing. There is more than plugging in proxies, wordlist, and member url, and pressing a button, I just don't know what!?! Why will not C-Force acknowledge the proxies checked in Charon....they load, but at the bottom where it indicates the number of good proxies and bad proxies it is showing 0 in both columns and is only indicating the total number of proxies loaded. When I press test it only indicates that my IP is not being given out. Nothing is working as the tutorial is suggesting. I am totalyy befuddled and not just a little stressed over this. Any suggestions of where I am going wrong, or a step I might have left out/overlooked. This cannot be this difficult. There must be something simple that I am not seeing and the tutorial isn't covering.
Someone....Anyone, please help. Thanks!
Mike
|
|
|
|
|
|
katmando
|
 |
« Reply #1 on: May 01, 2006, 12:58:15 AM » |
|
Obviously you haven't noticed that this is a proxy forum site that's primary function is to promote the sale of FPL (forum proxy leeching) software. C-Force is bruteforcing software that is designed to crack porn sites. The author of C-Force, Carpetboy, hangs out at a site called deny.de. In fact, his website is hosted there.
http://carpetboy.deny.de/
http://carpetboy.deny.de/faq.htm (you might definitely want to read these)
http://www.deny.de/phpbb2/viewforum.php?f=4 (post your questions here, you'll need to register first)
However, based on the simplicity of your problems, questions and basic common sense, I would strongly suggest that you take up a completely different hobby. Porn site cracking isn't for everyone, and it definitely isn't for you Mike. If that sounds harsh, forgive me but life is cruel at times.
|
I tell it like it is and that's offensive to those professing knowledge they don't have.
|
|
|
simmikie
Newbie

Posts: 7
|
 |
« Reply #2 on: May 01, 2006, 02:32:47 AM » |
|
Obviously you haven't noticed that this is a proxy forum site that's primary function is to promote the sale of FPL (forum proxy leeching) software. C-Force is bruteforcing software that is designed to crack porn sites. The author of C-Force, Carpetboy, hangs out at a site called deny.de. In fact, his website is hosted there. http://carpetboy.deny.de/
http://carpetboy.deny.de/faq.htm (you might definitely want to read these)
http://www.deny.de/phpbb2/viewforum.php?f=4 (post your questions here, you'll need to register first) However, based on the simplicity of your problems, questions and basic common sense, I would strongly suggest that you take up a completely different hobby. Porn site cracking isn't for everyone, and it definitely isn't for you Mike. If that sounds harsh, forgive me but life is cruel at times.
I had noticed, and my questions are related to proxies and what you may not have noticed is that the C-Force tutorial is just a few doors down. Thanks for the directions to the developer of C-Force, did you look this up just for me? Harsh? you are just being you. Feeling smug and secure in the animinoty offered by the web. You could have offered to be of assistance, but chose instead to take a shot at someone who has done nothing to you. Enjoy the feeling, because all you have accomplished is demonstrating what a small little being you are.
Mike
|
|
|
|
|
|
katmando
|
 |
« Reply #3 on: May 01, 2006, 06:54:20 AM » |
|
Okay, cutting through all your bs drama, lets forget Charon for now, just work with C-Force.
First and foremost, only certain types of proxyjudges work in C-Force. I've given you a few below. Save them in a file called proxyjudges.txt:
http://216.110.158.125/cgi-bin/jenv.cgi http://66.197.42.23/cgi-bin/jenv.cgi http://66.199.244.102/cgi-bin/jenv.cgi http://www.angelsfucked.com/cgi-bin/jenv.cgi http://www.anonymitytest.com/cgi-bin/jenv.cgi http://www.bootarou.com/cgi-bin/ip/env.cgi http://www.bsnoop.de/cgi-bin/jenv.cgi http://www.hive.gr/scgi-bin/jenv.cgi http://www.kanazawa-gu.ac.jp/~hayashiy/cgi-bin/log/env.cgi http://www2.andrews.edu/~bidwell/examples/env.cgi http://www2s.biglobe.ne.jp/~cru/library/cgi/env.cgi http://www2s.biglobe.ne.jp/~cru/library/tools/cgi-bin/env.cgi http://www2t.biglobe.ne.jp/~take52/test/env.cgi http://www3.wind.ne.jp/hassii/env.cgi http://www41.tok2.com/home/spiritman/env.cgi http://yasann2.hp.infoseek.co.jp/cgi-bin/jenv.cgi
I just tested the following list of proxies, all were anonymous at that time. Save this list in a file called proxies 050106.txt.
124.1.66.131:80 141.223.125.57:50050 145.89.190.221:8080 147.102.31.33:8080 150.187.145.62:8080 159.61.240.141:80 192.104.67.250:8080 193.191.141.115:80 193.194.64.112:80 195.41.44.179:8080 196.203.92.78:8080 196.38.203.23:8080 196.40.43.74:554 199.3.20.235:8080 200.114.227.239:6588 200.118.2.218:80 200.118.2.219:80 200.118.2.220:80 200.122.153.250:554 200.138.224.27:8080 200.161.9.120:80 201.143.145.189:8080 201.221.17.157:8080 201.51.254.94:8080 202.141.155.4:8080 202.146.67.238:8080 202.65.42.3:8080 203.145.148.20:80 203.146.213.187:8080 203.187.213.194:8080 203.235.21.148:50050 205.161.188.42:8080 207.175.34.2:49400 210.181.13.237:50050 210.194.76.29:8080 210.211.136.93:80 210.216.183.200:50050 210.227.114.218:8080 210.24.99.207:80 211.110.69.103:50050 211.133.230.127:8080 211.180.180.59:50050 211.183.103.4:50050 211.238.236.179:50050 211.44.113.64:50050 212.100.193.251:8080 212.102.24.13:80 212.116.209.234:8080 212.31.107.86:8080 213.130.100.236:80 216.12.200.106:8080 217.211.180.248:8080 217.216.48.227:6588 218.111.38.173:6588 218.179.105.1:8080 219.113.169.173:8080 219.193.60.227:8080 219.93.174.106:554 220.1.36.197:8080 220.124.184.138:50050 220.125.98.119:50050 220.146.45.57:8080 220.17.32.146:8080 220.226.171.126:6588 220.226.186.138:6588 220.245.125.253:80 220.245.253.240:80 220.71.148.165:50050 220.72.196.73:6588 220.72.196.76:6588 220.72.59.124:50050 221.114.194.14:8080 221.19.96.71:8080 221.247.133.206:8080 221.250.33.227:8080 221.94.188.30:8080 221.94.78.59:8080 222.112.118.85:50050 222.112.99.102:50050 222.136.91.1:80 24.123.156.77:80 24.238.53.161:49400 24.250.164.254:49400 24.73.208.122:8080 24.95.65.231:7212 58.180.1.149:50050 58.237.220.208:50050 58.85.80.166:8080 60.241.115.149:80 60.241.64.4:80 61.11.157.32:8080 61.17.212.207:6588 61.3.127.85:6588 61.99.21.20:50050 62.149.122.178:8080 64.34.164.14:8080 64.49.147.15:8080 64.95.64.77:80 66.36.212.18:8080 67.166.181.117:49400 68.156.153.136:8080 68.87.64.105:554 70.88.104.170:8080 72.16.237.67:80 72.36.155.130:5678 81.184.83.247:8080 82.151.217.29:8080 82.198.121.2:8080 82.233.19.69:8080 82.99.210.195:8080 83.104.229.95:8080 83.16.167.178:80 83.36.202.118:80 85.114.85.238:553 87.52.70.94:8080
Now start C-Force and click on the Settings tab. Important:[/u] If any of the boxes have been ticked, untick them.
Now load the proxyjudge file. Click Load and locate your saved proxyjudge file, click on it and then click Open.
Now click on the Proxies tab and then click on Load. Same as above, highlight the file and click Open.
Now click on the Test button. After C-Force has tested the proxies it will eventually eliminate any bad ones. Save the file again.
You should now have a list of "ready" proxies.
This concludes the only proxy related aspects to your question and bewilderment. But again, I urge you to select a different hobby. You simply do not have the mental capacity to even become a reasonable button pusher.
|
I tell it like it is and that's offensive to those professing knowledge they don't have.
|
|
|
simmikie
Newbie

Posts: 7
|
 |
« Reply #4 on: May 01, 2006, 01:12:07 PM » |
|
Okay, cutting through all your bs drama, lets forget Charon for now, just work with C-Force. First and foremost, only certain types of proxyjudges work in C-Force. I've given you a few below. Save them in a file called proxyjudges.txt: http://216.110.158.125/cgi-bin/jenv.cgi http://66.197.42.23/cgi-bin/jenv.cgi http://66.199.244.102/cgi-bin/jenv.cgi http://www.angelsfucked.com/cgi-bin/jenv.cgi http://www.anonymitytest.com/cgi-bin/jenv.cgi http://www.bootarou.com/cgi-bin/ip/env.cgi http://www.bsnoop.de/cgi-bin/jenv.cgi http://www.hive.gr/scgi-bin/jenv.cgi http://www.kanazawa-gu.ac.jp/~hayashiy/cgi-bin/log/env.cgi http://www2.andrews.edu/~bidwell/examples/env.cgi http://www2s.biglobe.ne.jp/~cru/library/cgi/env.cgi http://www2s.biglobe.ne.jp/~cru/library/tools/cgi-bin/env.cgi http://www2t.biglobe.ne.jp/~take52/test/env.cgi http://www3.wind.ne.jp/hassii/env.cgi http://www41.tok2.com/home/spiritman/env.cgi http://yasann2.hp.infoseek.co.jp/cgi-bin/jenv.cgi I just tested the following list of proxies, all were anonymous at that time. Save this list in a file called proxies 050106.txt. 124.1.66.131:80 141.223.125.57:50050 145.89.190.221:8080 147.102.31.33:8080 150.187.145.62:8080 159.61.240.141:80 192.104.67.250:8080 193.191.141.115:80 193.194.64.112:80 195.41.44.179:8080 196.203.92.78:8080 196.38.203.23:8080 196.40.43.74:554 199.3.20.235:8080 200.114.227.239:6588 200.118.2.218:80 200.118.2.219:80 200.118.2.220:80 200.122.153.250:554 200.138.224.27:8080 200.161.9.120:80 201.143.145.189:8080 201.221.17.157:8080 201.51.254.94:8080 202.141.155.4:8080 202.146.67.238:8080 202.65.42.3:8080 203.145.148.20:80 203.146.213.187:8080 203.187.213.194:8080 203.235.21.148:50050 205.161.188.42:8080 207.175.34.2:49400 210.181.13.237:50050 210.194.76.29:8080 210.211.136.93:80 210.216.183.200:50050 210.227.114.218:8080 210.24.99.207:80 211.110.69.103:50050 211.133.230.127:8080 211.180.180.59:50050 211.183.103.4:50050 211.238.236.179:50050 211.44.113.64:50050 212.100.193.251:8080 212.102.24.13:80 212.116.209.234:8080 212.31.107.86:8080 213.130.100.236:80 216.12.200.106:8080 217.211.180.248:8080 217.216.48.227:6588 218.111.38.173:6588 218.179.105.1:8080 219.113.169.173:8080 219.193.60.227:8080 219.93.174.106:554 220.1.36.197:8080 220.124.184.138:50050 220.125.98.119:50050 220.146.45.57:8080 220.17.32.146:8080 220.226.171.126:6588 220.226.186.138:6588 220.245.125.253:80 220.245.253.240:80 220.71.148.165:50050 220.72.196.73:6588 220.72.196.76:6588 220.72.59.124:50050 221.114.194.14:8080 221.19.96.71:8080 221.247.133.206:8080 221.250.33.227:8080 221.94.188.30:8080 221.94.78.59:8080 222.112.118.85:50050 222.112.99.102:50050 222.136.91.1:80 24.123.156.77:80 24.238.53.161:49400 24.250.164.254:49400 24.73.208.122:8080 24.95.65.231:7212 58.180.1.149:50050 58.237.220.208:50050 58.85.80.166:8080 60.241.115.149:80 60.241.64.4:80 61.11.157.32:8080 61.17.212.207:6588 61.3.127.85:6588 61.99.21.20:50050 62.149.122.178:8080 64.34.164.14:8080 64.49.147.15:8080 64.95.64.77:80 66.36.212.18:8080 67.166.181.117:49400 68.156.153.136:8080 68.87.64.105:554 70.88.104.170:8080 72.16.237.67:80 72.36.155.130:5678 81.184.83.247:8080 82.151.217.29:8080 82.198.121.2:8080 82.233.19.69:8080 82.99.210.195:8080 83.104.229.95:8080 83.16.167.178:80 83.36.202.118:80 85.114.85.238:553 87.52.70.94:8080 Now start C-Force and click on the Settings tab. Important:[/u] If any of the boxes have been ticked, untick them. Now load the proxyjudge file. Click Load and locate your saved proxyjudge file, click on it and then click Open. Now click on the Proxies tab and then click on Load. Same as above, highlight the file and click Open. Now click on the Test button. After C-Force has tested the proxies it will eventually eliminate any bad ones. Save the file again. You should now have a list of "ready" proxies. This concludes the only proxy related aspects to your question and bewilderment. But again, I urge you to select a different hobby. You simply do not have the mental capacity to even become a reasonable button pusher.
An invitation has been sent to you. I hope you will accept. I'd like to show you what I am good at.
Mike
|
|
|
|
|
|
katmando
|
 |
« Reply #5 on: May 01, 2006, 02:58:19 PM » |
|
Here's a clue for you, it absolutely isn't necessary to quote an entire reply when you're the next person to make a comment. Geez, I'll bet you have a hard time finding the light switch even with the lights on.
Oh, and as far as the invitation is concerned, I don't date braindead men.
|
I tell it like it is and that's offensive to those professing knowledge they don't have.
|
|
|
simmikie
Newbie

Posts: 7
|
 |
« Reply #6 on: May 01, 2006, 03:25:09 PM » |
|
Here's a clue for you, it absolutely isn't necessary to quote an entire reply when you're the next person to make a comment. Geez, I'll bet you have a hard time finding the light switch even with the lights on.
Oh, and as far as the invitation is concerned, I don't date braindead men.
As hostile as you are, I doubt you date at all.
Mike
|
|
|
|
|
|
Terry
|
 |
« Reply #7 on: May 01, 2006, 07:22:19 PM » |
|
Knowledge & Arrogance :)
|
|
|
|
|
thchog
|
 |
« Reply #8 on: May 07, 2006, 01:51:21 AM » |
|
DAMMIT, I thought I was the only arrogant S.O.B. around here, very nice info though katmando, I had the same problem when I first used c-force, so he may or may not be cut out for "censored" but thats not the reason. (':?') I did though dig my head in the monitor and change every setting 10 ways from Sunday until I figured it out. The certain type of judge from Kats list he mentioned for those wondering will be the same that read "other" in Charon.
THC
|
|
|
|
|
|
katmando
|
 |
« Reply #9 on: May 18, 2006, 11:17:23 AM » |
|
^^Charon identifies the proxyjudges needed to be used by C-Force as "other" only because CGI ENVIRONMENT (the correct name) wouldn't fit. Besides, there are many programs and ways to check functionality of a proxyjudge besides Charon.
|
I tell it like it is and that's offensive to those professing knowledge they don't have.
|
|
|
|